Publikationen, an denen er mitarbeitet JUAN CARLOS LEYVA DÍAZ (44)

2023

  1. Impacts of Organic Emerging Contaminants (Erythromycin, Ibuprofen, and Diclofenac) on the Performance of a Membrane Bioreactor Treating Urban Wastewater: A Heterotrophic Kinetic Investigation

    Membranes, Vol. 13, Núm. 8

  2. Kinetic Effects of Ciprofloxacin, Carbamazepine, and Bisphenol on Biomass in Membrane Bioreactor System at Low Temperatures to Treat Urban Wastewater

    Membranes, Vol. 13, Núm. 4

2022

  1. Microalgae bioreactor for nutrient removal and resource recovery from wastewater in the paradigm of circular economy

    Bioresource Technology, Vol. 363

  2. Study of the Potential for Agricultural Reuse of Urban Wastewater with Membrane Bioreactor Technology in the Circular Economy Framework

    Agronomy, Vol. 12, Núm. 8

2020

  1. Moving bed biofilm reactor as an alternative wastewater treatment process for nutrient removal and recovery in the circular economy model

    Bioresource Technology, Vol. 299

  2. Respirometric method for kinetic modeling of ammonium-oxidizing and nitrite-oxidizing bacteria in a membrane bioreactor

    AIChE Journal, Vol. 66, Núm. 8

2019

  1. Effect of variable salinity wastewater on performance and kinetics of membrane-based bioreactors

    Journal of Chemical Technology and Biotechnology, Vol. 94, Núm. 10, pp. 3236-3250

  2. Heterotrophic kinetic study and nitrogen removal of a membrane bioreactor system treating real urban wastewater under a pharmaceutical compounds shock: Effect of the operative variables

    Water (Switzerland), Vol. 11, Núm. 9

  3. Influence of salinity cycles in bioreactor performance and microbial community structure of membrane-based tidal-like variable salinity wastewater treatment systems

    Environmental Science and Pollution Research, Vol. 26, Núm. 1, pp. 514-527

  4. Influent salinity conditions affect the bacterial communities of biofouling in hybrid MBBR-MBR systems

    Journal of Water Process Engineering, Vol. 30

2018

  1. Biofouling formation and bacterial community structure in hybrid moving bed biofilm reactor-membrane bioreactors: Influence of salinity concentration

    Water (Switzerland), Vol. 10, Núm. 9

  2. Effect of salinity variation on the autotrophic kinetics of the start-up of a membrane bioreactor and hybrid moving bed biofilm reactor-membrane bioreactor at low hydraulic retention time

    Water Science and Technology, Vol. 77, Núm. 3, pp. 714-720

  3. Influence of temperature on the start-up of membrane bioreactor: Kinetic study

    Water Science and Technology, Vol. 77, Núm. 2, pp. 448-455

  4. Membrane bioreactor and hybrid moving bed biofilm reactor-membrane bioreactor for the treatment of variable salinity wastewater: Influence of biomass concentration and hydraulic retention time

    Chemical Engineering Journal, Vol. 336, pp. 102-111

2017

  1. Effect of salinity variation on the autotrophic kinetics of the start-up of membrane bioreactor and hybrid moving bed biofilm reactor-membrane bioreactor at low hydraulic retention time

    Lecture Notes in Civil Engineering (Springer), pp. 523-529

  2. Impact of ciprofloxacin, carbamazepine and ibuprofen on a membrane bioreactor system: Kinetic study and biodegradation capacity

    Journal of Chemical Technology and Biotechnology, Vol. 92, Núm. 12, pp. 2944-2951

  3. Impact of hydraulic retention time on MBR and hybrid MBBR-MBR systems through microbiological approach: TGGE and enzyme activities

    Lecture Notes in Civil Engineering (Springer), pp. 561-566

  4. Influence of temperature on the start-up of membrane bioreactor: Kinetic study

    Lecture Notes in Civil Engineering (Springer), pp. 165-171

  5. Kinetic modeling of Shewanella baltica KB30 growth on different substrates through respirometry

    Microbial Cell Factories, Vol. 16, Núm. 1

  6. Kinetic modeling of two-step nitrification in hybrid and pure moving bed biofilm reactormembrane bioreactor systems for municipal wastewater treatment

    Hybrid Systems: Performance, Applications and Technology (Nova Science Publishers, Inc.), pp. 133-158