Argitalpenak (116) LUISA MARÍA GIL MARTÍN argitalpenak

2024

  1. Control of geometry and stability of tensegrities in the Octahedron and X-Octahedron families

    Computers and Structures, Vol. 305

  2. Qué influye en el índice de suspensos en las asignaturas de Hormigón armado y Estructura metálica del grado de Ingeniería Civil

    VI Jornadas Internacionales en Innovación Docente en las titulaciones técnicas (INDOTEC 2023): Libro de actas (Universidad de Granada), pp. 181-186

2023

  1. A Simple Method for Calculating the Shear Deformation of Reinforced Concrete Elements in the Elastic and Plastic Domains

    International Journal of Civil Engineering, Vol. 21, Núm. 12, pp. 2037-2047

  2. A comparison of the most important properties of structural concrete: European standards versus American standards

    European Journal of Environmental and Civil Engineering

  3. Bayesian structural parameter identification from ambient vibration in cultural heritage buildings: The case of the San Jerónimo monastery in Granada, Spain

    Engineering Structures, Vol. 284

  4. Influence of the level of connectivity on the members of the Octahedron and X-Octahedron families of tensegrities

    Engineering Structures, Vol. 296

  5. Procedure for the correct placement of Long-Thread Short-Thread couplers in mechanical connections of reinforcing bars

    Advances in Concrete Construction, Vol. 16, Núm. 2, pp. 91-96

  6. The Relationship between Concrete Strength and Classes of Resistance against Corrosion Induced by Carbonation: A Proposal for the Design of Extremely Durable Structures in Accordance with Eurocode 2

    Sustainability (Switzerland), Vol. 15, Núm. 10

  7. Yield displacement charts for performance-based seismic design

    Bulletin of Earthquake Engineering, Vol. 21, Núm. 1, pp. 237-255

2022

  1. A Seismic Design Procedure for Different Performance Objectives for Post-Tensioned Walls

    Journal of Earthquake Engineering, Vol. 26, Núm. 1, pp. 475-492

  2. CMMost 2021: 6th International Conference on Mechanical Models in Structural Engineering koord.

    Universidad de Valladolid

  3. Effective Moment of Inertia of Reinforced Concrete Piles

    ACI Structural Journal, Vol. 119, Núm. 5, pp. 167-178

  4. Estimation of short-term deflection in RC beams using effective moments ofinertia

    CMMost 2021: 6th International Conference on Mechanical Models in Structural Engineering

  5. Fragility Curves for Historical Structures with Degradation Factors Obtained from 3D Photogrammetry

    Heritage, Vol. 5, Núm. 4, pp. 3260-3279

  6. From octagonal connection graphs belonging to the Z-Octahedron family to new tensegrity structures

    International Journal of Solids and Structures, Vol. 254-255

  7. IDENTIFICATION OF HERITAGE STONE BUILDING DEGRADATION PATTERNS BASED ON DIGITAL PHOTOGRAMMETRY DATA

    REHABEND

  8. Mechanical Characterization and Creep Behavior of a Stone Heritage Material Used in Granada (Spain): Santa Pudia Calcarenite

    Rock Mechanics and Rock Engineering, Vol. 55, Núm. 9, pp. 5659-5669

  9. Mechanical characterization and elastic stiffness degradation of unstabilized rammed earth

    Journal of Building Engineering, Vol. 56

  10. The Octahedron family as a source of tensegrity structures: study of theequilibrium configurations considering different force:length ratios

    CMMost 2021: 6th International Conference on Mechanical Models in Structural Engineering

  11. Topological design of the octahedron tensegrity family

    Engineering Structures, Vol. 259