Publicacións nas que colabora con Agustín Bueno López (37)

2024

  1. Auto-Pressurized Multi-Stage Tesla-Valve Type Microreactors in Carbon Monoliths Obtained Through 3D Printing: Impact of Design on Fluid Dynamics and Catalytic Activity

    Advanced Functional Materials

  2. Cocoa husk as precursor of carbonaceous materials for supercapacitors electrodes

    Journal of Electroanalytical Chemistry, Vol. 963

  3. Modeling and experimental analysis of CO2 methanation reaction using Ni/CeO2 monolithic catalyst

    Environmental Science and Pollution Research, Vol. 31, Núm. 22, pp. 32766-32783

  4. Structural design and particle size examination on NiO-CeO2 catalysts supported on 3D-printed carbon monoliths for CO2 methanation

    Journal of CO2 Utilization, Vol. 81

2022

  1. Guefoams (guest-containing foams) as novel heterogeneous catalysts: Preparation, characterization and proof-of-concept testing for CO2 methanation

    Materials and Design, Vol. 217

  2. Intrinsic kinetics of CO2 methanation on low-loaded Ni/Al2O3 catalyst: Mechanism, model discrimination and parameter estimation

    Journal of CO2 Utilization, Vol. 57

  3. Kinetics, Model Discrimination, and Parameters Estimation of CO2 Methanation on Highly Active Ni/CeO2 Catalyst

    Industrial and Engineering Chemistry Research, Vol. 61, Núm. 29, pp. 10419-10435

  4. Monitoring by in situ NAP-XPS of active sites for CO2 methanation on a Ni/CeO2 catalyst

    Journal of CO2 Utilization, Vol. 60

  5. Shaping a soot combustion Ce0.5Pr0.5Ox catalyst

    Applied Surface Science, Vol. 584

  6. Sponge-like carbon monoliths: Porosity control of 3D-printed carbon supports and its influence on the catalytic performance

    Chemical Engineering Journal, Vol. 432

  7. Stable NiO–CeO2 nanoparticles with improved carbon resistance for methane dry reforming

    Journal of Rare Earths, Vol. 40, Núm. 1, pp. 57-62

2021

  1. Active, selective and stable NiO-CeO2 nanoparticles for CO2 methanation

    Fuel Processing Technology, Vol. 212

  2. Design and fabrication of integral carbon monoliths combining 3D printing and sol-gel polymerization: Effects of the channel morphology on the CO-PROX reaction

    Catalysis Science and Technology, Vol. 11, Núm. 19, pp. 6490-6497

  3. Effect of Ru loading on Ru/CeO2 catalysts for CO2 methanation

    Molecular Catalysis, Vol. 515

  4. Effect of pr in co2 methanation ru/ceo2 catalysts

    Journal of Physical Chemistry C, Vol. 125, Núm. 22, pp. 12038-12049

  5. Elucidating the Role of the Metal Catalyst and Oxide Support in the Ru/CeO2-Catalyzed CO2Methanation Mechanism

    Journal of Physical Chemistry C, Vol. 125, Núm. 46, pp. 25533-25544

  6. High performance tunable catalysts prepared by using 3D printing

    Materials, Vol. 14, Núm. 17

  7. Investigations of the effect of h2 in co oxidation over ceria catalysts

    Catalysts, Vol. 11, Núm. 12

  8. Mathematical Modeling of Preferential CO Oxidation Reactions under Advection-Diffusion Conditions in a 3D-Printed Reactive Monolith

    Industrial and Engineering Chemistry Research, Vol. 60, Núm. 31, pp. 11689-11698

  9. Mineral manganese oxides as oxidation catalysts: Capabilities in the Co-Prox reaction

    ACS Sustainable Chemistry and Engineering, Vol. 9, Núm. 18, pp. 6329-6336