Publicaciones en las que colabora con ANTOLINO GALLEGO MOLINA (21)

2023

  1. Influence of weathering on mechanical properties of culm samples of Guadua angustifolia Kunth bamboo with and without nodes

    Wood Material Science and Engineering, Vol. 18, Núm. 2, pp. 434-445

  2. Mechanical behaviour of poplar laminated veneer lumber with fiber reinforced polymer under shear and compression stresses

    Wood Material Science and Engineering, Vol. 18, Núm. 3, pp. 893-901

2022

  1. Development of an analytical model to predict the bending behavior of composite glulam beams in tension and compression

    Journal of Building Engineering, Vol. 45

  2. Non-Destructive Multi-Feature Analysis of a Historic Wooden Floor

    Buildings, Vol. 12, Núm. 12

2021

  1. Improving ductility and bending features of poplar glued laminated beams by means of embedded carbon material

    Construction and Building Materials, Vol. 304

  2. Modulus of elasticity of I-214 young poplar wood from standing trees to sawn timber: influence of the age and stand density

    European Journal of Wood and Wood Products, Vol. 79, Núm. 5, pp. 1225-1239

2020

  1. Acoustic emission and numerical analysis of pine beams retrofitted with FRP and poplar wood

    Materials, Vol. 13, Núm. 2

  2. Acoustic emission in I-214 poplar wood under compressive loading

    European Journal of Wood and Wood Products, Vol. 78, Núm. 4, pp. 723-732

  3. Enhancement of bending properties of Douglas-fir and poplar laminate veneer lumber (LVL) beams with carbon and basalt fibers reinforcement

    Construction and Building Materials, Vol. 263

  4. Experimental and numerical analysis of mixed I-214 Poplar/pinus sylvestris laminated timber subjected to bending loadings

    Materials, Vol. 13, Núm. 14

2019

  1. Diagnosis of hysteretic dampers used for seismic protection of structures by means ultrasonic measurements

    Measurement: Journal of the International Measurement Confederation, Vol. 137, pp. 344-354

  2. Effect of location, clone, and measurement season on the propagation velocity of poplar trees using the Akaike information criterion for arrival time determination

    Materials, Vol. 12, Núm. 3

  3. Experimental validation of a CFRP laminated/fabric hybrid layout for retrofitting and repairing timber beams

    Mechanics of Advanced Materials and Structures, Vol. 26, Núm. 22, pp. 1902-1909

  4. Metallic slit-plate dampers: Damage evaluation with metal magnetic memory technique and application to structures with rocking columns

    Metals, Vol. 9, Núm. 9

  5. Pine beams retrofitted with FRP and poplar planks: Mechanical behavior

    Materials, Vol. 12, Núm. 19

  6. Temporal acoustic emission index for damage monitoring of RC structures subjected to bidirectional seismic loadings

    Materials, Vol. 12, Núm. 7

2018

  1. Acoustic emission during wood-CFRP adhesion tests

    International Journal of Adhesion and Adhesives, Vol. 87, pp. 79-90

  2. Experimental and analytical analysis for bending load capacity of old timber beams with defects when reinforced with carbon fiber strips

    Composite Structures, Vol. 186, pp. 29-38

  3. Health monitoring of timber beams retrofitted with carbon fiber composites via the acoustic emission technique

    Composite Structures, Vol. 206, pp. 392-402

  4. Monitoring of carbon fiber-reinforced old timber beams via strain and multiresonant acoustic emission sensors

    Sensors (Switzerland), Vol. 18, Núm. 4