Publicacions (30) Publicacions de FRANCISCO JOSÉ RESCALVO FERNÁNDEZ

2024

  1. Experimental study of hybrid pine-birch glued-laminated timber beams assisted by digital image correlation technique

    European Journal of Wood and Wood Products

  2. Relationship between the acoustic emission and the strain field in finger joints of engineered wood products for construction

    Engineering Failure Analysis, Vol. 162

2023

  1. Digital image correlation and numerical analysis of CFRP-poplar timber interface subjected to modified single shear test

    Composite Structures, Vol. 320

  2. Influence of weathering on mechanical properties of culm samples of Guadua angustifolia Kunth bamboo with and without nodes

    Wood Material Science and Engineering, Vol. 18, Núm. 2, pp. 434-445

  3. Mechanical behaviour of poplar laminated veneer lumber with fiber reinforced polymer under shear and compression stresses

    Wood Material Science and Engineering, Vol. 18, Núm. 3, pp. 893-901

  4. Multi-side Digital Image Correlation (DIC) evaluation of CFRP bonded to poplar timber

    Mechanics of Advanced Materials and Structures

2022

  1. Analysis of poplar timber finger joints by means of Digital Image Correlation (DIC) and finite element simulation subjected to tension loading

    European Journal of Wood and Wood Products, Vol. 80, Núm. 3, pp. 555-567

  2. Development of an analytical model to predict the bending behavior of composite glulam beams in tension and compression

    Journal of Building Engineering, Vol. 45

  3. Non-Destructive Multi-Feature Analysis of a Historic Wooden Floor

    Buildings, Vol. 12, Núm. 12

  4. Transformed-section method applied to multispecies glulam timber beams subjected to pure bending

    Mechanics of Advanced Materials and Structures, Vol. 29, Núm. 27, pp. 6814-6823

2021

  1. Acoustic emission analysis of raw bamboo subjected to tensile tests

    Mechanics of Advanced Materials and Structures, Vol. 28, Núm. 13, pp. 1389-1397

  2. An insight into mechanical properties of heartwood and sapwood of large French Douglas-fir LVL

    Construction and Building Materials, Vol. 299

  3. Bending, shearing, and compression properties of fast growing French Douglas fir LVL

    World Conference on Timber Engineering 2021, WCTE 2021

  4. Improving ductility and bending features of poplar glued laminated beams by means of embedded carbon material

    Construction and Building Materials, Vol. 304

  5. Modulus of elasticity of I-214 young poplar wood from standing trees to sawn timber: influence of the age and stand density

    European Journal of Wood and Wood Products, Vol. 79, Núm. 5, pp. 1225-1239

2020

  1. Acoustic emission and numerical analysis of pine beams retrofitted with FRP and poplar wood

    Materials, Vol. 13, Núm. 2

  2. Acoustic emission in I-214 poplar wood under compressive loading

    European Journal of Wood and Wood Products, Vol. 78, Núm. 4, pp. 723-732

  3. Enhancement of bending properties of Douglas-fir and poplar laminate veneer lumber (LVL) beams with carbon and basalt fibers reinforcement

    Construction and Building Materials, Vol. 263

  4. Experimental and numerical analysis of mixed I-214 Poplar/pinus sylvestris laminated timber subjected to bending loadings

    Materials, Vol. 13, Núm. 14

2019

  1. Diagnosis of hysteretic dampers used for seismic protection of structures by means ultrasonic measurements

    Measurement: Journal of the International Measurement Confederation, Vol. 137, pp. 344-354