Publicaciones (32) Publicaciones en las que ha participado algún/a investigador/a

2016

  1. A new approach for the study of fatigue cracking phenomenon in bituminous mixtures

    RILEM Bookseries, Vol. 13, pp. 193-198

  2. A review of fatigue damage in bituminous mixtures: Understanding the phenomenon from a new perspective

    Construction and Building Materials, Vol. 113, pp. 927-938

  3. A study into the mechanical performance of different configurations for the railway track section: A laboratory approach

    Engineering Structures, Vol. 119, pp. 13-23

  4. An analysis of the performance of deconstructed tires for use as pads in railroad tracks

    Journal of Civil Engineering and Management, Vol. 22, Núm. 6, pp. 739-746

  5. Analysing industrial manufacturing in-plant and in-service performance of asphalt mixtures cleaner technologies

    Journal of Cleaner Production, Vol. 121, pp. 56-63

  6. Analysis of ballast tamping and stone-blowing processes on railway track behaviour: The influence of using USPs

    Geotechnique, Vol. 66, Núm. 6, pp. 481-489

  7. Autopsy of ultrafiltration membranes for drinking-water production with in-line coagulation and ozonation pre-treatments

    Desalination and Water Treatment, Vol. 57, Núm. 42, pp. 19619-19631

  8. Carbamazepine behaviour and effects in an urban wastewater MBR working with high sludge and hydraulic retention time

    Journal of Environmental Science and Health - Part A Toxic/Hazardous Substances and Environmental Engineering, Vol. 51, Núm. 10, pp. 855-860

  9. Comparative study of in-line coagulation and/or ozonization pre-treatment for drinking-water production with spiral-wound ultrafiltration membranes

    Chemical Engineering and Processing: Process Intensification, Vol. 105, pp. 21-29

  10. Comparison of the effect of recycled crumb rubber and polymer concentration on the performance of binders for asphalt mixtures

    Materiales de construcción, Vol. 66, Núm. 323

  11. Construction waste estimation depending on urban planning options in the design stage of residential buildings

    Construction and Building Materials, Vol. 113, pp. 561-570

  12. Developing multiple regression models from the manufacturer's ground-source heat pump catalogue data

    Renewable Energy, Vol. 95, pp. 413-421

  13. Emerging risk in the construction industry: Recommendations formanaging exposure to nanomaterials

    DYNA: revista de la Facultad de Minas. Universidad Nacional de Colombia. Sede Medellín, Vol. 83, Núm. 196, pp. 48-54

  14. Experimental evaluation of using stainless steel slag to produce mechanomutable asphalt mortars for their use in smart materials

    Smart Materials and Structures, Vol. 25, Núm. 11

  15. Herramientas para la predicción, optimización y control de depuradoras aplicadas a sistemas MBR

    Ingeniería civil, Núm. 181, pp. 55-63

  16. High-modulus asphalt mixtures modified with acrylic fibers for their use in pavements under severe climate conditions

    Journal of Cold Regions Engineering, Vol. 30, Núm. 4

  17. Implementation of the mechanistic-empirical pavement design in northern Peru using a calibration coefficient for the International Roughness Index

    Construction and Building Materials, Vol. 102, pp. 270-280

  18. MEPROCS framework for Craniofacial Superimposition: Validation study

    Legal Medicine, Vol. 23, pp. 99-108

  19. Mechanical performance of mechanomutable asphalt binders under cyclic creep and recovery loads

    Construction and Building Materials, Vol. 113, pp. 506-512

  20. Processes and technologies for the recycling and recovery of spent lithium-ion batteries

    Renewable and Sustainable Energy Reviews, Vol. 60, pp. 195-205