Publicaciones en colaboración con investigadores/as de Iowa State University (27)

2022

  1. From Laboratory Mixes to Full Scale Test: Rutting Evaluation of Bio-recycled Asphalt Mixes

    RILEM Bookseries (Springer Science and Business Media B.V.), pp. 951-957

2021

  1. Effect of two novel bio-based rejuvenators on the performance of 50% RAP mixes–a statistical study on the complex modulus of asphalt binders and asphalt mixtures

    Road Materials and Pavement Design, Vol. 22, Núm. 5, pp. 1060-1077

2020

  1. A weigh-in-motion characterization algorithm for smart pavements based on conductive cementitious materials

    Sensors (Switzerland), Vol. 20, Núm. 3

  2. From laboratory mixes evaluation to full scale test: Fatigue behavior of bio-materials recycled asphalt mixtures

    Lecture Notes in Civil Engineering

2019

  1. Bio materials with reclaimed asphalt: from lab mixes properties to non-damaged full scale monitoring and mechanical simulation

    Road Materials and Pavement Design, Vol. 20, Núm. sup1, pp. S95-S111

  2. Full-scale validation of bio-recycled asphalt mixtures for road pavements

    Journal of Cleaner Production, Vol. 227, pp. 1068-1078

2018

  1. An experimental study on static and dynamic strain sensitivity of embeddable smart concrete sensors doped with carbon nanotubes for SHM of large structures

    Sensors (Switzerland), Vol. 18, Núm. 3

2017

  1. Continuous and embedded solutions for SHM of concrete structures using changing electrical potential in self-sensing cement-based composites

    Proceedings of SPIE - The International Society for Optical Engineering

  2. Damage detection, localization and quantification in conductive smart concrete structures using a resistor mesh model

    Engineering Structures, Vol. 148, pp. 924-935

  3. Enhanced lumped circuit model for smart nanocomposite cement-based sensors under dynamic compressive loading conditions

    Sensors and Actuators, A: Physical, Vol. 260, pp. 45-57

  4. Static and Dynamic Strain Monitoring of Reinforced Concrete Components through Embedded Carbon Nanotube Cement-Based Sensors

    Shock and Vibration, Vol. 2017

2016

  1. Structural Dynamics and Stability of Composite Structures

    Advances in Materials Science and Engineering

2015

  1. Ionization and scintillation of nuclear recoils in gaseous xenon

    Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 793, pp. 62-74

  2. Model-based damage evaluation of layered CFRP structures

    AIP Conference Proceedings

  3. Nonlinear ultrasonics for early damage detection

    Emerging Design Solutions in Structural Health Monitoring Systems (IGI Global), pp. 171-206

2014

  1. Characterization of a medium size Xe/TMA TPC instrumented with microbulk Micromegas, using low-energyγ-rays

    Journal of Instrumentation, Vol. 9, Núm. 4

  2. Description and commissioning of NEXT-MM prototype: First results from operation in a Xenon-Trimethylamine gas mixture

    Journal of Instrumentation, Vol. 9, Núm. 3

  3. Present status and future perspectives of the NEXT experiment

    Advances in High Energy Physics, Vol. 2014

2013

  1. Design and characterization of the SiPM tracking system of NEXT-DEMO, a demonstrator prototype of the NEXT-100 experiment

    Journal of Instrumentation, Vol. 8, Núm. 5

  2. Initial results of NEXT-DEMO, a large-scale prototype of the NEXT-100 experiment

    Journal of Instrumentation, Vol. 8, Núm. 4