Publicaciones en las que colabora con ANTOLINO GALLEGO MOLINA (41)

2023

  1. Influence of weathering on mechanical properties of culm samples of Guadua angustifolia Kunth bamboo with and without nodes

    Wood Material Science and Engineering, Vol. 18, Núm. 2, pp. 434-445

  2. Non-audible acoustic emission characterization of Reticulitermes termites in pine wood

    European Journal of Wood and Wood Products, Vol. 81, Núm. 4, pp. 935-945

2022

  1. Non-Destructive Multi-Feature Analysis of a Historic Wooden Floor

    Buildings, Vol. 12, Núm. 12

2021

  1. Modulus of elasticity of I-214 young poplar wood from standing trees to sawn timber: influence of the age and stand density

    European Journal of Wood and Wood Products, Vol. 79, Núm. 5, pp. 1225-1239

2020

  1. Acoustic emission in I-214 poplar wood under compressive loading

    European Journal of Wood and Wood Products, Vol. 78, Núm. 4, pp. 723-732

2019

  1. Damage assessment of earthquake dampers based on Preisach-Mayergoyz model

    Proceedings of the Biennial Baltic Electronics Conference, BEC

  2. Determination of yielding point by means a probabilistic method on acoustic emission signals for application to health monitoring of reinforced concrete structures

    Structural Control and Health Monitoring, Vol. 26, Núm. 2

  3. Diagnosis of hysteretic dampers used for seismic protection of structures by means ultrasonic measurements

    Measurement: Journal of the International Measurement Confederation, Vol. 137, pp. 344-354

  4. Effect of location, clone, and measurement season on the propagation velocity of poplar trees using the Akaike information criterion for arrival time determination

    Materials, Vol. 12, Núm. 3

  5. Experimental validation of a CFRP laminated/fabric hybrid layout for retrofitting and repairing timber beams

    Mechanics of Advanced Materials and Structures, Vol. 26, Núm. 22, pp. 1902-1909

  6. Health monitoring of reinforced concrete structures with hysteretic dampers subjected to dynamical loads by means of the acoustic emission energy

    Structural Health Monitoring, Vol. 18, Núm. 5-6, pp. 1836-1850

  7. Metallic slit-plate dampers: Damage evaluation with metal magnetic memory technique and application to structures with rocking columns

    Metals, Vol. 9, Núm. 9

  8. Pine beams retrofitted with FRP and poplar planks: Mechanical behavior

    Materials, Vol. 12, Núm. 19

  9. Temporal acoustic emission index for damage monitoring of RC structures subjected to bidirectional seismic loadings

    Materials, Vol. 12, Núm. 7

2018

  1. Acoustic emission during wood-CFRP adhesion tests

    International Journal of Adhesion and Adhesives, Vol. 87, pp. 79-90

  2. Acoustic emission energy b-value for local damage evaluation in reinforced concrete structures subjected to seismic loadings

    Mechanical Systems and Signal Processing, Vol. 102, pp. 262-277

  3. Experimental and analytical analysis for bending load capacity of old timber beams with defects when reinforced with carbon fiber strips

    Composite Structures, Vol. 186, pp. 29-38

  4. Health monitoring of timber beams retrofitted with carbon fiber composites via the acoustic emission technique

    Composite Structures, Vol. 206, pp. 392-402

  5. Monitoring of carbon fiber-reinforced old timber beams via strain and multiresonant acoustic emission sensors

    Sensors (Switzerland), Vol. 18, Núm. 4

  6. Strategy for required data reduction in the practical implementation in a low-cost electronic platform of an index for damage assessment of seismic dampers

    Measurement: Journal of the International Measurement Confederation, Vol. 114, pp. 1-8