LUIS FERMÍN CAPITÁN VALLVEY-rekin lankidetzan egindako argitalpenak (21)

2023

  1. Near-Field Communication Tag for Colorimetric Glutathione Determination with a Paper-Based Microfluidic Device

    Biosensors, Vol. 13, Núm. 2

2020

  1. Carbon dots as sensing layer for printed humidity and temperature sensors

    Nanomaterials, Vol. 10, Núm. 12, pp. 1-10

2019

  1. Fully 3D-Printed RFID Tags based on Printable Metallic Filament: Performance Comparison with other Fabrication Techniques

    Proceedings of the 2019 9th IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications, APWC 2019

2018

  1. Asymmetric enhanced surface interdigitated electrode capacitor with two out-of-plane electrodes

    Sensors and Actuators, B: Chemical, Vol. 254, pp. 588-596

  2. Compact readout system for chipless passive LC tags and its application for humidity monitoring

    Sensors and Actuators, A: Physical, Vol. 280, pp. 287-294

2017

  1. Characterization of an Interdigitated Capacitive Structure With Branches for Relative Humidity Sensing

    IEEE Sensors Letters, Vol. 1, Núm. 5

  2. Comparison of Fabrication Techniques for Flexible UHF RFID Tag Antennas [Wireless Corner]

    IEEE Antennas and Propagation Magazine, Vol. 59, Núm. 5, pp. 159-168

2016

  1. Development of a printed sensor for volatile organic compound detection at μg/L-level

    Sensors and Actuators, B: Chemical, Vol. 230, pp. 115-122

  2. Hybrid Printed Device for Simultaneous Vapors Sensing

    IEEE Sensors Journal, Vol. 16, Núm. 23, pp. 8501-8508

  3. Printed electrodes structures as capacitive humidity sensors: A comparison

    Sensors and Actuators, A: Physical, Vol. 244, pp. 56-65

2015

  1. A printed capacitive-resistive double sensor for toluene and moisture sensing

    Sensors and Actuators, B: Chemical, Vol. 210, pp. 542-549

  2. Cantilever Fabrication by a Printing and Bonding Process

    Journal of Microelectromechanical Systems, Vol. 24, Núm. 4, pp. 880-886

  3. Comparative study of printed capacitive sensors

    Proceedings of the 2015 10th Spanish Conference on Electron Devices, CDE 2015

  4. HF RFID Tag as Humidity Sensor: Two Different Approaches

    IEEE Sensors Journal, Vol. 15, Núm. 10, pp. 5726-5733

  5. Improved manufacturing process for printed cantilevers by using water removable sacrificial substrate

    Sensors and Actuators, A: Physical, Vol. 235, pp. 171-181

  6. Passive UHF RFID tag with multiple sensing capabilities

    Sensors (Switzerland), Vol. 15, Núm. 10, pp. 26769-26782

2014

  1. A novel electrode structure compared with interdigitated electrodes as capacitive sensor

    Sensors and Actuators, B: Chemical, Vol. 204, pp. 552-560

  2. Design and characterization of a low thermal drift capacitive humidity sensor by inkjet-printing

    Sensors and Actuators, B: Chemical, Vol. 195, pp. 123-131

  3. Design and development of sensing RFID tags on flexible foil compatible with EPC gen 2

    IEEE Sensors Journal, Vol. 14, Núm. 12, pp. 4361-4371

  4. Printed single-chip UHF passive radio frequency identification tags with sensing capability

    Sensors and Actuators, A: Physical, Vol. 220, pp. 281-289