Publicaciones en las que colabora con Jose Fernandez Salmeron (27)

2023

  1. Near-Field Communication Tag for Colorimetric Glutathione Determination with a Paper-Based Microfluidic Device

    Biosensors, Vol. 13, Núm. 2

2022

  1. Selectivity of Relative Humidity Using a CP Based on S-Block Metal Ions

    Sensors, Vol. 22, Núm. 4

2021

  1. Cellulose nanofibers as substrate for flexible and biodegradable moisture sensors

    Composites Science and Technology, Vol. 208

2020

  1. Carbon dots as sensing layer for printed humidity and temperature sensors

    Nanomaterials, Vol. 10, Núm. 12, pp. 1-10

2019

  1. Cost-effective techniques for sensors technology

    Journal of Sensors

  2. Fully 3D-Printed RFID Tags based on Printable Metallic Filament: Performance Comparison with other Fabrication Techniques

    Proceedings of the 2019 9th IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications, APWC 2019

2018

  1. Asymmetric enhanced surface interdigitated electrode capacitor with two out-of-plane electrodes

    Sensors and Actuators, B: Chemical, Vol. 254, pp. 588-596

  2. Compact readout system for chipless passive LC tags and its application for humidity monitoring

    Sensors and Actuators, A: Physical, Vol. 280, pp. 287-294

2017

  1. Characterization of an Interdigitated Capacitive Structure With Branches for Relative Humidity Sensing

    IEEE Sensors Letters, Vol. 1, Núm. 5

  2. Comparison of Fabrication Techniques for Flexible UHF RFID Tag Antennas [Wireless Corner]

    IEEE Antennas and Propagation Magazine, Vol. 59, Núm. 5, pp. 159-168

2016

  1. Development of a printed sensor for volatile organic compound detection at μg/L-level

    Sensors and Actuators, B: Chemical, Vol. 230, pp. 115-122

  2. Hybrid Printed Device for Simultaneous Vapors Sensing

    IEEE Sensors Journal, Vol. 16, Núm. 23, pp. 8501-8508

  3. Passive UHF RFID tag for multispectral assessment

    Sensors (Switzerland), Vol. 16, Núm. 7

  4. Printed electrodes structures as capacitive humidity sensors: A comparison

    Sensors and Actuators, A: Physical, Vol. 244, pp. 56-65

2015

  1. A printed capacitive-resistive double sensor for toluene and moisture sensing

    Sensors and Actuators, B: Chemical, Vol. 210, pp. 542-549

  2. Cantilever Fabrication by a Printing and Bonding Process

    Journal of Microelectromechanical Systems, Vol. 24, Núm. 4, pp. 880-886

  3. Comparative study of printed capacitive sensors

    Proceedings of the 2015 10th Spanish Conference on Electron Devices, CDE 2015

  4. HF RFID Tag as Humidity Sensor: Two Different Approaches

    IEEE Sensors Journal, Vol. 15, Núm. 10, pp. 5726-5733

  5. Improved manufacturing process for printed cantilevers by using water removable sacrificial substrate

    Sensors and Actuators, A: Physical, Vol. 235, pp. 171-181

  6. Passive UHF RFID tag with multiple sensing capabilities

    Sensors (Switzerland), Vol. 15, Núm. 10, pp. 26769-26782